The Most Trusted Residential Plumbing Contractor in Mount Pleasant & Charleston

Do you need plumbing repair? What about plumbing troubleshooting? No matter because Aptus Home Services does it all. We're the go-to plumber in the Lowcountry. Call us today!

When you need reliable plumbing repair, there’s only one name to remember — Aptus Home Services. We offer same-day service, straightforward pricing, and a 100% satisfaction guarantee. Whether it’s a clogged toilet, burst pipe, water heater replacement, or anything else, you can count on our trusted plumbers to do the job right the first time, every time.

We provide the following plumbing solutions in the Charleston Metro Area:

When time is critical, you can rely on us for emergency plumbing repairs.

Charleston County 24 Hour Plumber

Not every plumbing issue requires an emergency plumber, but sometimes, the longer you wait, the worse the damage gets and the more expensive it is to fix. Here are the situations where calling for immediate plumbing repair is warranted.

Burst Pipes: A burst pipe can quickly flood the home, causing extensive water damage, mold, and mildew.
Clogged Drains or Toilets: Severe clogs that back up, especially in toilets, can lead to unsanitary conditions.
Leaking Water Heater: Water heater leaks can quickly flood the surrounding area and disrupt your hot water supply.
Gas Leaks: Gas leaks are dangerous and should be handled by a trained professional to keep you and your family safe.

Day or night, you can count on Aptus Home Services’ plumbers for help. We offer a satisfaction guarantee and straightforward pricing.

Common Plumbing Issues in the Charleston Metro Area

Most homeowners experience plumbing issues, but some are more common than others. While we can handle any plumbing problem, here are the ones we run into the most.

Dripping faucets

Leaky pipes

Running toilets

Clogged drains

Low water pressure

Sewer line blockages

Water heater issues

Clogged toilets

Noisy pipes

Broken fixtures

Your plumbing system is complicated, and it takes a skilled plumber to identify and fix the problem so it doesn’t rear its ugly head a few weeks later. We provide the most reliable and friendly plumbing services in the Charleston Metro Area, so call us at the first sign of trouble.

Are you sick of running out of hot water? Call and ask about our expert tankless water heater services in the Lowcountry.

Greater Charleston, SC Plumbing Inspection Services

No one likes surprises, especially when it comes to their plumbing system. Aptus Home Services offers expert plumbing inspection services to ensure your system is running efficiently and to catch minor issues before they escalate. Here’s what our technicians can do for you.

Visual Inspection

Our plumbers examine all exposed pipes, fixtures, and appliances for leaks, corrosion, or damage.

Water Pressure Testing

We test the pressure to ensure it's within the safe or recommended range.

Drain Inspection

Drains are checked for slow drainage or blockages, and we can use a camera to look deep into the sewer system.

Water Heater Check

We check the water heater for leaks, sediment buildup, proper temperature settings, and overall health.

Sewer Line Check

We'll assess the sewer line for potential blockages or damage.

Backflow Testing

If you have a backflow preventer, we'll test it to ensure it's functioning properly and protect your water supply from contamination.

Ervin C.

9 days ago9 days ago

We completed the installation of the upgraded 4-ton split heat pump system, including the media air cabinet, aluminum roof stand, vibration isolators, 6″ fresh air intake, and seismic cables, with all components installed to manufacturer specifications to ensure long-term performance and reliability. We also installed a commercial rectangular duct system with five (5) 8″×12″ aluminum supply grilles with adjustable dampers to provide balanced airflow throughout the space, along with a 6″×6″ aluminum supply grille with an adjustable damper for the bathroom. All commissioning steps were performed according to manufacturer requirements, including a nitrogen pressure drop test, a vacuum decay test, and pulling a system vacuum down to 350 microns and holding for 10 minutes before starting the system and confirming proper operation. In addition, we replaced the capacitor on the downstairs HVAC system to restore proper operation and sealed off the fresh-air intake on the return using metal scr

Near W Coleman Blvd, Mount Pleasant, SC 29464

Ervin C.

9 days ago9 days ago

The capacitor on the downstairs HVAC system was replaced to restore proper operation and ensure reliable performance. Additionally, the fresh-air intake on the return was sealed using metal screws, tape, and mastic sealant, which improves overall system efficiency and prevents unconditioned air from entering the system.

Near Sisseton Ln, Mount Pleasant, SC 29466

Ervin C.

10 days ago10 days ago

The project successfully passed the rough inspection for both the mechanical and electrical components, confirming that all work completed to this stage meets the required standards and code compliance.

Near Harriman Ln, Charleston, SC 29492

Martin L.

12 days ago12 days ago

During the visit, the improper-polarity outlet was replaced, as the existing screws were too rusted and stripped to be reused. A new HOMELINE 20A breaker was installed in an available panel space to correct the double-tapped breaker issue, and the panel was labeled accordingly. Additional observations included the dryer exhaust discharging into the crawl space, a breaker labeled for the washing machine despite there being no corresponding outlet—only a dryer outlet present—and several vertically mounted outlets in the rooms lacking a ground connection, even though grounded wiring exists in the panel, suggesting the eight outlets may not be properly connected. The thermostat was also found detached from the wall and hanging by its wiring. New ductwork had been installed and sealed, including two new supply boots placed in the kitchen and one of the bedrooms.

Near Niagara St, North Charleston, SC 29405

Marshall A.

13 days ago13 days ago

Replaced a 4-ton Carrier system with a new 4-ton Daikin Fit system, including new zone dampers and a new zone control board. Removed the old equipment, installed a new secondary drain pan, and set the new air handler on a pump in the upstairs location. Connected the existing return box, installed a new supply plenum with new dampers, and sealed all ductwork. Mounted and wired the new zone board, including all dampers, thermostats, and sensors. Installed and wired new thermostats, including running new thermostat wire to the master bedroom. Flushed the existing line set, installed the new condenser on a stand, brazed the refrigerant lines at both the air handler and condenser, pressure-tested the system, and pulled a deep vacuum. Installed a new drain line with safety switches, started up the system, and verified proper operation.

Near River Vista Way, Mount Pleasant, SC 29466

Frequently Asked Plumbing Questions

How can I unclog a drain?

Unclogging a drain can be a manageable task, and there are several methods you can explore based on how stubborn the blockage is.

Here’s an informative guide to help you tackle the issue:
1. Boiling Water: Start by carefully boiling a pot of water. Once it’s ready, pour the water slowly down the drain in stages, giving it time to penetrate the clog.

This technique is particularly effective against grease or soap buildup, making it a great first step.

2. Baking Soda and Vinegar:

Pour about one cup of baking soda into the drain.
Follow this with one cup of vinegar.
Quickly cover the drain with a plug or cloth to contain the bubbling reaction for around 30 minutes.
Afterwards, flush the drain with hot water.

This powerful combination works wonders to break down organic matter and address minor clogs.

3. Plunger:

Fill the sink or tub with enough water to cover the base of the plunger.
Position the plunger over the drain and vigorously push and pull.
Once you have done this several times, remove the plunger to check if the water has drained away.

This tool is particularly useful for tackling solid clogs like hair or small objects.

4. Drain Snake or Auger:

Insert the drain snake into the clog and start turning the handle as you push it further down.
When you encounter resistance, crank the snake to either break apart the blockage or hook it so you can pull it out.
Carefully pull the snake back out.

This method addresses deeper clogs that a plunger may not reach.

5. Using a Wet/Dry Vacuum:

Switch the vacuum to liquid mode.
Ensure a snug fit over the drain opening.
Turn on the vacuum to attempt to remove the clog.

This method is particularly effective for larger debris or significant blockages.

6. Chemical Drain Cleaners:

Caution: If you opt for this route, follow the instructions closely. Remember to ventilate the area well, and it’s best to avoid using these cleaners if you’ve already tried another method.

Chemical drain cleaners can tackle stubborn clogs, but do pay attention; they may pose risks to your plumbing and the environment.

7. Inspect the P-Trap: Place a bucket underneath the sink. Next, carefully unscrew the P-trap (the curved pipe beneath your sink) to check for clogs.

This method targets buildup directly and can effectively resolve issues if the blockage is located in this area.

8. Precautions

Always wear gloves and protective eyewear when dealing with cleaners or tough clogs.
Steer clear of mixing different chemical cleaners, as this can produce harmful fumes.

If none of these methods do the trick, contacting a professional plumber is a good idea.

What causes a clogged drain?

A clogged drain can occur for several reasons, often related to the accumulation of substances that obstruct water flow.

Common causes include:

Hair: Strands of hair can accumulate in drains, particularly in shower and sink drains, creating a blockage.
Food particles: In kitchen sinks, food scraps can get stuck on the sides of pipes or within the trap, leading to a buildup that obstructs water flow.
Oil and grease: When cooking oils and fats are washed down the sink, they can solidify and accumulate in the pipes, contributing to clogs.
Soap residue: Soap can interact with minerals in the water to create soap scum, which can build up over time and impede drainage.
Toilet paper: Excessive amounts of toilet paper or flushing non-flushable items can lead to clogs in toilets.
Foreign objects: Small items like toys, hygiene products, or accessories can accidentally fall into drains and create blockages.
Old plumbing: Aging plumbing systems may have corroded pipes or joints that are more prone to leaks and clogs.

To prevent clogged drains, it’s advisable to take precautions like using drain covers, avoiding the disposal of non-biodegradable items in toilets, and performing regular maintenance.

Whether it's a new plumbing installation, emergency plumbing repair, or anything in between, you can count on Aptus Home Services in Charleston & Mt Pleasant. Call us today at 843-874-3155.